Suburbs we cover here: Solheim, Klopperpark, Germiston CBD, Castleview
Hazeldene is established housing close in to the centre, on stands that are generally tighter than the southern suburbs.
What we see in Hazeldene
Access and lintel height are the two things we check first here. Neither is unusual for Germiston, but on these stands both tend to apply at once, which narrows what will physically work.
We survey both before quoting and tell you what the opening supports. Where a roller shutter is the only option that fits, we say that rather than quoting a sectional and dealing with it on the day.
Getting on site
Access varies a lot on this side, from tight older stands to smallholdings where the vehicle cannot get close to the building, so we survey for it rather than assuming. We confirm what has to be moved, whether there is room to work and how the door will physically reach the opening before manufacture, which avoids the wasted install day that this kind of variation otherwise guarantees.
Motors, backup and load shedding
We match the motor to what the door actually does and to the supply that is available, which on the older and outlying properties is not always what the plan says. Battery backup is standard on our installs and sized to cycle the door properly through a full load shedding block, which matters more on a long driveway with a second gate than most people expect.
Repairs on any make
We repair any make of door. On this side the usual list is springs, pivots, bottom rails and curtains that have taken a knock, and most of it we can turn around quickly because we make the parts ourselves. If the honest fix is a repair we will fit it, and we will tell you roughly how long it should last so you can plan rather than be surprised.
What it costs
We quote Hazeldene jobs off a free measured survey, itemised so you can see what the door, the motor and the installation each cost, and fixed in writing before anything is manufactured. We do not quote a range over the phone and then adjust it on site, because that is not a price, it is a deposit.
How soon we can be there
Surveys in Hazeldene are normally within one working day and the quote follows the same day the survey is done. Manufacture depends on the door, and we give you a real date rather than an optimistic one. Breakdowns are attended same-day wherever we can reach you.
Getting a quote
Send us the opening, or ask for a survey and we will come and measure it. Either way you get an itemised written price for your Hazeldene door, valid as quoted, with no charge for the visit.
Roller shutter and industrial door services in Hazeldene
Roller Shutter Doors in Hazeldene
We build roller shutter doors for Hazeldene openings of every size, from small shopfront curtains to wide vehicle bays, each one made to the surveyed opening.
Roller Shutter Door Installation in Hazeldene
Our own teams install in Hazeldene — we do not subcontract, which is why the people who fit the door are the people who come back to it.
Roller Shutter Door Repairs in Hazeldene
We repair roller shutter doors throughout Hazeldene on any make — bent slats, seized guides, failed bearings and motors that have given up.
Roller Door Repairs in Hazeldene
Roller door repairs in Hazeldene are usually a fraction of a replacement, and we will tell you plainly when a curtain has gone past economic repair.
Industrial Roller Shutter Doors in Hazeldene
Industrial roller shutter doors for the wide vehicle openings in Hazeldene, built to the measured span with commercial-duty gear.
Industrial Roller Shutter Door Repairs in Hazeldene
Industrial doors in Hazeldene fail from impact and duty cycle more than age, and both are repairable — we carry bearings, guides, springs and cables on the van.
Roller Shutter Door Manufacturers in Hazeldene
Because we manufacture rather than import and resell, Hazeldene customers get doors made to their opening and spares that still fit a decade on.
Industrial Door Manufacturers in Hazeldene
Industrial doors for Hazeldene are cut, rolled and assembled at our own works, which is why we can tell you exactly what went into one three years later.
Industrial Door Repairs in Hazeldene
We repair industrial doors of any make in Hazeldene, and will quote a repair against a replacement honestly rather than defaulting to the bigger invoice.
Roller Shutter Door Servicing in Hazeldene
Scheduled servicing in Hazeldene covers guides, bearings, spring tension, seals, fixings and the motor safety systems, with a written report per door.
Emergency Roller Shutter Door Repairs in Hazeldene
Emergency callouts in Hazeldene are attended around the clock — our teams are local, so it is a short run rather than a scheduled visit.
Need a door in Hazeldene?
Send the opening size and your suburb. A consultant calls you back, usually within two working hours — or call the standby number if the door has already stopped.
What customers say
Reviews from Hazeldene and nearby
No unpleasant surprises
Very happy with the service we received. The quotation was straightforward, the installation was professional and there were no unpleasant surprises.
Verified customervia Google
Reliable commercial door maintenance
We use RDSA for our commercial door maintenance and have been very impressed with their reliability. They understand how important it is to keep our doors operational.
Verified customervia Google
More secure and still neat
Excellent quality and service. Our new roller shutter door has made the premises much more secure while still looking neat and professional.
Verified customervia Google
Our work
Doors we have built and fitted
Common questions
Roller doors in Hazeldene
Yes. We manufacture at our own works, so a non-standard Hazeldene opening is a build rather than a problem. That matters out this way, where workshops, barns and double-depth garages were built to whatever suited at the time and almost none of it matches a stock size. We survey what is structurally there and build to that.
That is the floor fall rather than the seal. On sloped Hazeldene stands the floor line is rarely level, so a door built square to the lintel shows daylight at one end and no amount of extra weather strip will close it. We survey the fall and build the bottom rail to it, which fixes the cause instead of adding another strip that will not seal either.
Only if it needs it. A motor that has been dragging a binding door for years is usually finished, and fitting a new door to it means we are back in six months. We test it properly rather than assuming. Where it is genuinely sound we reuse it and take it off the quote, and where it is not we say so upfront.
Related
Also worth a look
Roller Shutter Doors Klippoortje
Older housing and small industrial on the southern edge
Roller shutter doors, garage doors and industrial shutters manufactured at our own works and installed across Klippoortje by our own teams.
Roller Shutter Doors Klopperpark
Light and medium industrial units, high daily cycles
Roller shutter doors, garage doors and industrial shutters manufactured at our own works and installed across Klopperpark by our own teams.
Roller Shutter Doors Knights
Rail sidings, freight handling and heavy vehicle traffic
Roller shutter doors, garage doors and industrial shutters manufactured at our own works and installed across Knights by our own teams.